Basic Info.
Power Supply
Rechargeable Battery
Switch
Press Button Switch
With Light Source
With Light Source
Battery Type
Lithium Battery
Material of Reflecting cup
Metallic
Surface Preparation of Reflecting cup
Corrugated
Certification
CE, RoHS, FCC
LED
CREE Xm-L LED (Max 5000 Lumens)
Battery
18650 Lithium Battery Pack
Operation Voltage
12.6V to 8.4V
Transport Package
EVA Box
Origin
Shenzhen, Guangdong, China
Product Description
Specification:
Model: WM26 Diving Video light |
Bulb: CREE XM-L LED (Max 5000 Lumens) |
Color temperature: 5000k-5500K(White video light), 6500K(White Spot light) |
Switch 1: Long press for turn on or off, then whit(vide light): High>Med Switch 2: Wjote(Spot light) >Red>Blue>off |
Runtime: White(Video light) 60mins-120mins, White(Spot light) 120mins, Red 180mins, Blue 180mins |
Reflector: Glossy aluminum reflector |
Lens: 5mm Polycarbonate lens |
Body material: Durable aircraft-grade aluminum. |
Angle of light beam: 10°-110° |
Surface treatment: Durable Aircraft-grade aluminum |
Color: Black |
Battery: 18650 Li- ion battery pack. With battery over-discharging protection, polarity reversing protection |
Operation voltage: 12.6V to 8.4V |
Waterproof: 100 meters underwater |
Dimensions: 158mm (length)*55.(dia. of body)*67mm (dia. of head) |
Impact resistance: 1.5M |
Weight in air: 812grams (with battery) |
Underwater Weight: 385 grams (with battery) |
POWER INDICATOR:
Ring-shaped power indicator surrounding the switch lights up in green, or yellow, or red, when the power capacity is above 70%, or reaches 70-30% or 30-10%. It flashes in red for the power capacity between 10% and 5%, and switches off automatically when the power capacity is below 5%.
LOW BATTERY WARNING:
The light flashes 3 times when the power capacity reaches 10-5%; it repeats after 5 seconds, and then switches to lower brightness. The light switches off automatically when the power capacity is less than 5%.
BATTERY INSTALLATION:
1. Hold the light with its head pointing upward, unscrew the light head.
2. Remove the used battery from the battery compartment, if there is any; and put in the fully charged battery per polarity signs.
3. Screw light head down. Do not over tighten to break the O-ring.
BATTERY CHARGING:
1. Plug the charger in the power socket, and the charger's indicator light is green in the free-load status.
2. Plug the battery in the slot of the charger. The charger's indicator light is red if the charging is in process; and it turns green after the charging is completed.
3. After the battery is fully charged, unplug the charger, use or store the battery properly.
MODES CHANGING:
Continuously quickly press the button switch to cycle through high, medium and off. The light can also be turned off at high brightness level by a user's long pressing the button switch for three seconds.
2. After each pressing, the switch will bounce back to its original position automatically.
CAUTION:
1.Please never attempt to repair or modify the light by yourself.
2. Please check the light regularly for sharp edges, scratches or damages to the surface or O-ring, as this can cause the light to flood under pressure. PLEASE LUBRICATE THE THREADS AND O-RING GROOVE, AND REPLACE THE O-RING TIMELY.
3. Please rinse the light surface thoroughly after each use, and allow sufficient time for it to dry both inside and outside before storage.
4.Please remove the battery for transport or storage. Do not lay the battery in a fire or expose it to direct heat. Do not wet or hit the battery. Please charge the battery after each use, or once every three months, to avoid over-discharging.
5. Please never leave the light unattended when it is on.
6. Please keep the device out of the reach of children or pets.
7. Please never shine the light to human or pet's eyes.
8. Please use the battery with re/discharge protection circuit board or BMS (Battery Management System) for this light.
9. Please handle lens with care, to avoid breakage. Lens can break or splinter when some hard object bangs against the device. Splinters may cause eye and skin injuries.
Address:
3rd Floor, Building#11, Futing Industrial Zone, Zhucun, Guanlan, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Apparel & Accessories, Arts & Crafts, Electrical & Electronics, Instruments & Meters, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Office Supplies, Tools & Hardware, Toys
Management System Certification:
ISO 9000
Company Introduction:
Shenzhen Xiware Technologies dedicated our tireless effort to design and make world class portable illumination tools. Our premium LED flashlights have already passed CE, RoHS and IPX-8 certificates and were widely used by law enforcement agencies, public safety agencies, and individuals who desire the best flashlights available for a specific purpose or task-camping, fishing, hunting and ECI (Everyday Carrying Item) use. We combine the ingenuity and craftsmanship to create Xiware legendary lights reputed all around the world.
Our LED flashlights successfully integrated bright beam, constant current regulation circuit and low operating costs all in a very stylish design, became the standard of high quality flashlights.
Xiware is adding more and more new models to our ever expanding product line. Though challenges are ever increasing, with every new Xiware product we strive to bring our customers the highest quality tool possible.